My Travels…

So this past weekend I traveled to central Virginia. On my way I decided to field test a little system I had thrown together for keeping track of repeaters. Now to preface this; my system I going to describe to you was completely free to me using tools and software in which I already owned. I’m sure there’s probably commercially available products to do this for you.

To start let me give a short description of what I was actually doing. Using Microsoft Streets and Trips mapping software I imports a CSV file, actually a couple, into one map of my route I take to Lynchburg. What was in this data I imported you ask? Well, repeaters, all the repeaters I would remotely be able to pass on my route.

Here is my list of tools:
Microsoft Streets and Trips(what I had)
ASUS Laptop
GlobalSat BU-353 Waterproof USB GPS ReceiverUSB extension cable

To start off I searched the web for repeater data and found several sites that allowed me to pick and choose areas of which to export. There were a couple formats I cold have exported but I chose a simple CSV, comma separate value. Very simple and lots of software understands that format. Next I opened up all those CSV’s in excel, but most any spread sheet program would work. The data given from the sites was to much. I purged some columns of data. What I kept was the; Lat&Long, Freq, PL Tone, and callsign/name or club affiliation.

Now what I’m working with is two spreadsheets for North Carolina and two for Virginia, I merged the two sheets per state together but kept the two states separate, felt like it was just a good idea for future development.

Now the following steps are pretty easy and straight forward. With that said if you use software that’s not Microsoft Streets and Trips it may not be. Using the import wizard in the software I imported them as I believe point or way-points. But they were added to the open map I had as a addition of some kind which gave me a little ability to edit them. So all I did next was create a new icon in the “.GIF” format. The gif allows for transparent background. So I created a very small little tower icon that dots each place on the map to where a repeater is. Each little tower can be clicked to display the repeater info respectively.

Side note of two things. First during importation of the data you have to ability to go in and label what each column of data actually is telling S&T’s that Lat actually is Lat and there’s 3 available user data slots in which you can put the repeater specific data, Freq, PL and etc…

Now after all that work here’s what I came up with 68 contacts over 5 hours(while driving). Plus one club-net check-in(South Wake ARC). All on 2 meters, 144 – 148mhz. Really all of that didn’t span anymore than 2 or 2.5 mhz of the band. I didn’t go very low, really. I’ve never took part in any contests in ham radio and nor am I a pro or expert in any way. But for me I am very pleased with my results!!

Keeping safety in mind I really wasn’t able to record contacts and wasn’t really even thinking about it till like halfway back riding home but here’s a few:

kk4eqp
kk4bvu
kk4dbm
South Wake ARC – net check-in
W4WC
AJ4HK

KK4EQM

Leave a Reply

Your email address will not be published. Required fields are marked *