11/21/12

Second Operating Positon

Following my experience from Field Day 2012 I’ve been thinking. What can I do? I did help as much as I could with setup and operating, but I did not really contribute anything. So between now and the ARRL 2013 Field Day I’m trying to get things together. Being I am now a General Class operator with plenty of operating privileges I will be acquiring a HF capable transceiver. I’ve also recently gotten a mobile dual band rig. As written about previously.

What I did today was wire in a second operating position in my SUV. Version one of what I did was to simply run 2 CAT6 cables from the radio mounted area to the back of the SUV and crimped on RJ-45 connectors. I then used f-f couplers to hook everything together. This worked just fine, but had 2 flopping cables in the back. You know, flopping around. Well that was version one.


Version 2 is a little more buttoned up. I’ve maintained the same cables running to the back from the radio. Now, instead of 2 RJ-45 connectors at

 

the end of these two cables, there are two keystone sockets. One to plug microphone and one for the control head. This way the look i cleaner and a little more flexible interface. To house all this I picked up a slim electrical box. I put some 3M Velcro strips to hold it in place. And finally I simply mounted my keystones in a 6 port face plate. See the keystones you buy with various sockets and plugs are a universal square snap in fit.

Why go through the trouble you ask? Well as I mentioned I’m doing this in preparation for Field Day. I imagine myself sitting in a chair working my radios from the car. This is so I can go flip the two cables and plug up to setup a station in the back. That simple. I don’t have to un-mount the radio, find power in the back, plug everything in and then be on the air. 1 minute and I’m going. I would love to find some switching device that would let me jump back and forth without having to go to the radio and switch cables.

What do I have left? Well not much if I’m honest. Directly for this project I need audio in the back. 2 speakers. Specifically the MFJ 281 ClearTone Speaker. What I’m planning on doing is fabbing up a bracket to mount the speaker right inside the SUV to the roof. I’ll setup an audio switch of some kind to send it to the back and I’ll have either 1/8 jack keystones or